Elation ARTISTE MONDRIAN User Manual page 16

G O B O I N S T A L L A T I O N
7. REPLACING A ROTATING GOBO
Locate the specific Rotating GOBO to be replaced. Carefully grip the GOBO and gently lift it slightly up to
pull it out and away until it fully clears the GOBO Wheel.
8. Locate the tab of the retaining spring, then using a precision pick (or similar tool), carefully press the
retaining spring inward to relieve the tension. Remove the retaining spring and carefully separate the
GOBO from the GOBO Holder. Lastly, remove the flat washer attached to the removed GOBO and attach
it to the desired replacement GOBO. Install the replacement Rotating GOBO following the steps above in
reverse order.
CAUTION: TAKE CARE NOT TO SCRATCH GOBO OR GOBO HOLDER!
16