ResMed Lumis HFT Quick Start Manual page 3

Connecting/disconnecting supplemental oxygen
Your Lumis HFT device is designed to be compatible with levels of supplemental oxygen up to
10 L/min.
Always make sure that the device is turned on and airflow generated before the oxygen supply is
turned on. Always turn the oxygen supply off before the device, so that unused oxygen does not
accumulate within the device enclosure and create a risk of fire.
Note: Do not connect supplemental oxygen input directly to a medical gas pipeline system, oxygen
bottle or other high pressure oxygen source. A flow regulator must be fitted to ensure the delivered
oxygen remains at or below 10 L/min.
For advice on connecting to an oxygen source, contact your homecare provider.
Connecting
1
Disconnecting
1
Refer to the Lumis HFT User Guide for warnings and cautions and details on how to perform a
functional check.
2
2
2