What's Next - Cisco Firepower 1100 Started Manual

Firepower Threat Defense Deployment with FMC
Step 2
Issue the shutdown command:
firepower(local-mgmt) # shutdown
Example:
firepower(local-mgmt)# shutdown
This command will shutdown the system.
Please enter 'YES' or 'NO': yes
INIT: Stopping Cisco Threat Defense......ok
Step 3
Monitor the system prompts as the firewall shuts down.
Step 4 Observe the Power LED and Status LED to verify that the chassis is powered off (appear unlit).
Step 5
After the chassis has successfully powered off, you can then turn off the power switch and unplug the power
to physically remove power from the chassis if necessary.

What's Next?

To continue configuring your FTD, see the documents available for your software version at
Cisco Firepower
For information related to using FMC, see the
Documentation.
Continue?
Firepower Management Center Configuration
Cisco Firepower 1100 Getting Started Guide
What's Next?
Navigating the
Guide.
115