Register The Ftd With The Fmc - Cisco Firepower 1100 Started Manual

Register the FTD with the FMC

• RA VPN—See the
Step 2 If you have not already done so, register the FMC with the Smart Licensing server.
Registering requires you to generate a registration token in the Smart Software Manager. See the
configuration guide
Register the FTD with the FMC
Register the FTD to the FMC.
Before you begin
• Gather the following information that you set in the FTD initial configuration:
Procedure
Step 1
In FMC, choose Devices > Device Management.
Step 2 From the Add drop-down list, choose Add Device, and enter the following parameters.
Cisco Firepower 1100 Getting Started Guide
98
When you add one of the above PIDs to your order, you can then choose a term-based subscription
corresponding with one of the following PIDs:
• L-FPR1120T-TMC-1Y
• L-FPR1120T-TMC-3Y
• L-FPR1120T-TMC-5Y
• L-FPR1140T-TMC-1Y
• L-FPR1140T-TMC-3Y
• L-FPR1140T-TMC-5Y
• L-FPR1150T-TMC-1Y
• L-FPR1150T-TMC-3Y
• L-FPR1150T-TMC-5Y
Cisco AnyConnect Ordering
for detailed instructions.
• FTD management IP address or hostname, and NAT ID, if configured
• FMC registration key
Firepower Threat Defense Deployment with FMC
Guide.
FMC