Honda HRX217K6HYA Manual page 61

ROTO-STOP®/DRIVE BELT
2. Align the drive disc keyway with the key, and install the
drive disc. Do not allow the key to move or fall out during
assembly.
3. Install the clutch spring into the blade holder with the
"UP" mark facing the engine.
Install the driven disc into the blade holder with the metal
surface facing the clutch spring.
4. Install the blade holder, clutch spring, and driven disc
as an assembly.
Hold the flywheel nut with a 19 mm socket and ratchet,
and then tighten the 10 x 24 mm hex bolt.
TORQUE: 49 ~ 59 N•m (36 ~ 43 ft-lb)
.
4-8
HRX217HYA • HRX217HZA
DRIVE DISC
BLADE HOLDER
ENGINE
BLADE
HOLDER/CLUTCH
SPRING/DRIVEN
DISC
HEX BOLT,
10 x 24 mm
49 ~ 59 N•m
(36 ~ 43 ft-lb)
KEY
CLUTCH
SPRING
DRIVEN DISC