Honda HRX217K6HYA Manual page 57

ROTO-STOP®/DRIVE BELT
8. Hold the flywheel nut with a ratchet and 19 mm socket,
and then remove the 10 x 24 mm hex bolt on the
Roto-Stop assembly.
Remove the blade holder, clutch spring, and driven disc.
Rotate the crankshaft so that the crankshaft keyway is up.
9. Remove the drive disc, but do not remove the key
from the crankshaft.
10.Slide the brake assembly off the crankshaft, and leave
the transmission drive pulley in place.
INSPECTION
1. Inspect the drive disc for discoloration from overheating
and excess wear.
.
4-4
HRX217HYA • HRX217HZA
CLUTCH SPRING
10 x 24 mm
HEX BOLT
BLADE HOLDER
DRIVE DISC
BRAKE
ASSEMBLY
DRIVEN DISC
KEY
DRIVE DISC