Internal Polarity Jumper - Directed Electronics Automate AM5 Installation Manual
Hide thumbs
Also See for Automate AM5:
- Owner's manual (25 pages) ,
- Owner's manual (23 pages) ,
- Installation manual (33 pages)
Table of Contents
Advertisement
Internal polarity jumper
A 10A fuse is used as both a fuse and a polarity jumper. This jumper
determines the light flash output polarity. In the (+) position, the on-
board relay is enabled and the unit outputs (+)12V on the WHITE wire,
H1/2. In the (-) position, the onboard relay is enabled for (-) output on
the WHITE wire, H1/2. To access the jumper, remove the sliding door
from on top of the control module, as shown below.
Light fuse jumper setting
29
© 2008 Directed Electronics All rights reserved.
Hide quick links:
Advertisement
Table of Contents
