Menu; Name Set Toggle; None/All; Panel Lock - GRASS VALLEY NV9605 User Manual

Operation
Buttons
You will select one or more levels for a breakaway and then press a source button to
complete the take. When all level buttons are deselected, or when all level buttons are
selected, a take is "all-level. " When one or more level buttons are selected, a take occurs on
just those levels.
You must select levels before selecting the source.
The color of the level buttons reflect the levels of the current destination in a limited way.
See also the

Menu

X, M
This button puts the panel in menu mode and produces a menu on the buttons and in the
displays that provides access to a variety of panel functions.
Without the button, the operator has no access to the menu functions.
By pressing certain buttons, you makes menu selections and enter data (such as panel ID)
or change brightness values. When the panel is in menu mode, you must press the 'Menu'
button to cycle through the functions of the menu. See
The button definition has no fields to configure.

Name Set Toggle

L, X, M
An 'Name Set Toggle' button toggles the panel between its default name set and the
"system name" set. Whichever name set you select becomes the "active" name set.

None/All

X
The 'None/All' button toggles the panel between all levels (of the current destination)
being selected and none of the levels being selected.

Panel Lock

L, X, M
The button prevents accidental changes to the panel settings, especially router crosspoints.
When the panel is locked, the button array becomes blank except for the Panel Lock button
which becomes high tally amber.
The button is a toggle: press the panel lock button again to revert the panel to its previous
state.

Previous Source

X, M
The button presets the previously routed source to the currently selected destination. To
restore the previous route, you must next press 'Take' assuming you have not changed the
destination. This function is useful when you make a route in error.
The button does not restore the previous destination. If you changed the destination and
press 'Previous Source' , the take will not restore the previous route.

Salvo

L, X, M
The salvo button executes a system salvo immediately.
34
None/All button function, following.
Menu Mode on page 42.