Environmental Protection; Technical Specifications - Metabo G 400 Operating Instructions Manual

A Collets (including nut)
dia. 3 mm = 6.31947
dia. 1/8" = 6.31948
dia. 6 mm = 6.31945
dia. 1/4" = 6.31949
dia. 8 mm = 6.31946
B Clamping frame 6.28329 for clamping during
work with flexible shafts, including:
C Clamping bracket 6.27107 for safe securing to
the work bench (tighten clamping screw).
For a complete range of accessories, see
www.metabo.com or the catalogue.
9. Repairs
Repairs to electrical tools must be carried out
by qualified electricians ONLY!
If you have Metabo electrical tools that require
repairs, please contact your Metabo service centre.
For addresses see www.metabo.com.
You can download spare parts lists from
www.metabo.com.

10. Environmental Protection

Observe national regulations on environmentally
compatible disposal and on the recycling of disused
machines, packaging and accessories.

11. Technical specifications

Explanation of details on page 3. Subject to
changes serving technical progress.
n = No-load speed (maximum speed)
n = On-load speed
1
I = Current at 120 V
120 V
P = Nominal power input
1
P = Power output
2
D = Maximum grinding wheel diameter
max
T = Maximum thickness of bonded grinding
max
wheels
d = Collet bore of the collet chuck
m = Weight without mains cable
The technical specifications quoted are subject to
tolerances (in compliance with the relevant valid
standards).
Wear ear protectors!
ENGLISH en
9