The Ice Maker - Baumatic TITAN2 Instruction Manual

o Place a cup against the pad in the dispenser and push it, after a
few seconds it will dispense water, cubed ice or crushed ice.
What comes out of the dispenser will depend on what option you
selected before pushing the pad.
o You should place the glass directly underneath the water/ice
chute and not rest it on the base of the dispenser. Otherwise
water/ice can spill or splash.
o When the dispenser is producing ice, you should remove the
cup/glass from the dispenser chute when it is half full, otherwise
you may get ice overflowing or the dispenser outlet could
become blocked.
o Shortly after ice has come out, you will hear a snapping sound
which is a shut off valve operating, this stops further ice from
being dispensed.
o 1 hour after you have dispensed cubed or crushed ice, the
selection mode will return to chilled water automatically.

The ice maker

o 7-8 times a day, the ice maker will automatically produce
approximately 10 ice cubes.
o These ice cubes will be stored in the ice cube storage case (see
page 8 for the location of this).
o If the ice storage case becomes full, then the automatic ice
making operation will stop.
o It is normal for there to be banging sounds, whilst the ice is
being deposited into the ice cube storage case.
o If you use the dispenser several times in quick succession, then
the ice cube storage case may empty. You will then need to wait
approximately 24 hours for the ice maker to refill it.
20