Set Up A Bridge For A Port Group Or Vlan Profile; Set Up A Bridge For A Port Group - NETGEAR Orbi Pro SRR60 User Manual

Orbi Pro Router Model SRR60 and Orbi Pro Satellite Model SRS60
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select Speedtest.
The Speedtest page displays.
5. Click the Take a Speedtest button.
Your Internet's download and upload speeds display.
Set up a bridge for a port group or VLAN
profile
Some devices, such as an IPTV, cannot function behind the router's Network Address
Translation (NAT) service or firewall. Based on what your Internet service provider (ISP)
requires, for the device to connect to the ISP's network directly, you can enable the
bridge between the device and the router's Internet port or add new VLAN profiles to
the bridge.
Note: If your ISP provides directions on how to set up a bridge for IPTV and Internet
service, follow those directions.
Note: This feature is only supported if the router is in router mode. The Orbi Pro router
is called the Base in the web interface.

Set up a bridge for a port group

If the devices that are connected to the router's Ethernet port an IPTV device, your ISP
might require you to set up a bridge for a port group for the router's Internet interface.
A bridge with a port group prevents packets that are sent between the IPTV device and
the router's Internet port from being processed through the router's network address
translation (NAT) service.
To configure a port group and enable the bridge:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window displays.
Manage the LAN, WAN, and
WiFi Settings
115 User Manual