Manage The Iot Wifi Network Settings; Enable The Iot Wifi Network And Change The Settings - NETGEAR Orbi Pro SRR60 User Manual

Orbi Pro Router Model SRR60 and Orbi Pro Satellite Model SRS60
When you select this option, additional fields display so that you can specify the
RADIUS server. Do the following:
a. In the IP address field, enter the IP address of the RADIUS server to which
the router must connect.
b. In the Port field, enter the port number that the router must use to
communicate with the RADIUS server.
By default, the port number is 1812.
c. In the Shared Secret field, enter the password that the router must use to
communicate with the RADIUS server.
This password must be configured on the RADIUS server. This password is
used to authenticate the router (not a WiFi client) against the RADIUS server.
6. Click the Apply button.
Your settings are saved.

Manage the IoT WiFi network settings

You can set up four WiFi networks for your Orbi Pro network: one for administrative
access, one for employee access, one for Internet of things (IoT) devices, and one for
guest access.
When IoT devices connect to the IoT WiFi network, they cannot see other devices that
are connected to the network and cannot access the local area network (LAN).
Note: The router web interface calls the IoT WiFi network the Wireless 3 network.

Enable the IoT WiFi network and change the settings

Before you can set up the IoT WiFi network, you must enable it. You must be connected
to the admin network to enable the IoT WiFi network and change the settings.
When IoT devices connect to the IoT WiFi network, they cannot see other devices that
are connected to the network and cannot access the local area network (LAN).
Note: The router web interface calls the IoT WiFi network the Wireless 3 network.
To enable the IoT WiFi network and change the WiFi settings:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
Manage the LAN, WAN, and
WiFi Settings
91 User Manual