Table of Contents
Advertisement
2.
Inspection and storage
At the time of receiving the equipment carefully cross check
all the elements against the shipping documents in order to
ensure that all the crates and boxes have been received.
Inspect all the units for any visible or hidden damage.
In the event of shipping damage, write precise details of the
damage on the shipper's delivery note and send immediately
a registered letter to the shipper within 48 hours, clearly stating
the damage caused. Forward a copy of this letter to the
manufacturer or his representative.
Never store or transport the unit upside down. It must be
stored indoors, completely protected from rain, snow etc. The
2.1 Disposal information
Units must be disposed of in accordance with local regulations.
Information for Users on Collection and Disposal of Old Equipment and Used Batteries
These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and
batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used
batteries, please take them to applicable collection points, in accordance with your national legislation and the Directives 2012/19/EU of 4
July 2012 on waste electrical and electronic equipment (WEEE).
By disposing of these products and batteries correctly, you will help to save valuable resources and prevent any potential negative effects
on human health and the environment which could otherwise arise from inappropriate waste handling. For more information about
collection and recycling of old products and batteries, please contact your local municipality, your waste disposal service or the point of
sale where you purchased the items. Penalties may be applicable for incorrect disposal of this waste, in accordance with national
legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.
[Information on Disposal in other Countries outside the European Union]
These symbols are only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and
ask for the correct method of disposal.
Note for the battery symbol (bottom two symbol examples):
This symbol might be used in combination with a chemical symbol. In this case it complies with the requirement set by the Directive for
the chemical involved.
3.
Warranty
The appliances are delivered fully assembled, factory tested and ready to operate.
Any modification to the units without the manufacturer's prior approval, shall automatically render the warranty null and void.
The following conditions must be respected in order to maintain the validity of the warranty:
Commissioning shall be performed by specialised technicians from technical services approved by the manufacturer.
•
Maintenance shall be performed by technicians trained for this purpose.
•
Only Original Equipment spare parts shall be used.
•
All the operations listed in the present manual shall be performed within the required time limits.
•
THE WARRANTY SHALL BE NULL AND VOID IN THE EVENT OF NON-COMPLIANCE
WITH ANY OF THE ABOVE CONDITIONS.
unit must not be damaged by changes in the weather (high
and low temperatures). Excessively high temperatures (above
60°C) can harm certain plastic materials and cause
permanent damage. Moreover, the performance of certain
electrical or electronic components can be impaired.
Environmental conditions must be within the following limits:
- Minimum ambient temperature : -20°C
- Maximum ambient temperature : +55°C
- Maximum R.H. : 95% not condensing
The equipment must be stored in environments with a
temperature within the limits indicated above. High humidity
atmosphere may damage electrical components.
6
Hide quick links:
Advertisement
Table of Contents
