Table of Contents
Advertisement
3-2. DIAG Menu
3-2. DIAG Menu
The unit has the DIAG menu that is used for adjustments and diagnostics.
This menu has the hierarchical structure. The PAGE sub-menu is characterized as it is surrounded by the
triangle bracket < >.
Operation procedure
1. Starting up the DIAG menu
Press the DIAG button to enter the DIAG menu.
2. Select a PAGE
Move the asterisk * (cursor) using the UP or DOWN button to select the desired PAGE.
When the desired PAGE is selected, press the SET button.
Repeat this procedure until the desired ITEM is found.
3. Selecting an ITEM
Move the asterisk * (cursor) using the UP or DOWN button to select the desired item.
When an item is selected, press the SET button.
The setup value blinks.
4. Setting the ITEM
Change the data of the selected setup item by pressing the UP or DOWN button.
Press the SET button to register and save the changed value.
To return to the original value before change, press the DISPLAY button.
5. Exiting the DIAG menu
Press the DIAG button to exit the DIAG menu.
3-12
HDW-250
Advertisement
Table of Contents
