5-2-5. Cleaning the Stationary Heads
Note
Be careful not to damage the surfaces of the heads during cleaning.
Tools
. Cleaning cloth : 3-184-527-01
. Cleaning fluid : 9-919-573-01
Procedure
1. Clean the tape running surfaces of the FE head, CTL head and CUE/TC head in the vertical direction
using the cleaning cloth moistened with cleaning fluid.
n
If magnetic powder or other materials are attached to the head gaps of the FE head, CTL head and
CUE/TC head, an error may occur during recording or playback. Remove any magnetic powder
completely.
2. After cleaning, wipe the stationary heads using a dry cleaning cloth.
HDW-250
CTL head
FE head
5-2. Cleaning
CUE/TC head
5-5