READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE OPERATING YOUR SOLAR LIGHT.
Step 1
To form a hanger for the solar light, connect
the hook section with one or two stand
sections, depending on the height desired.
Step 2
Locate an area of solid ground where you
can place your solar lights and insert
ground stake.
Step or press down on ground stake to aid
in driving stake into ground. Make sure
ground stake is inserted all the way into
ground.
NOTE:
Ground can be softened by soaking
area with water first.
Step 3
Once ground stake is firmly in place, insert
hanging hook into center hole of ground
stake.
Step 4
Hang light fixture from hanging hook. The
photocell light sensor should point away
from other nighttime light sources.
Step 5
Charge in direct sunlight for 10-12 FULL,
SUNNY DAYS. The light will turn on
automatically at night. Allow at least
10-12 cycles (i.e., 10-12 days and nights of
charging and discharging) for the battery to
charge to its full capacity.
3
OPERATING INSTRUCTIONS
SAVE THIS MANUAL FOR FUTURE REFERENCE.
Hook Section
Stand Sections
Ground Stake
Hanging Hook
Ground Stake