Setting The Ringing Volume; Selecting Alert Tone; Using The Phone On Two Networks - NEC TalkTime Max 962 Owner's Manual

The ringing tone sounds when there's an incoming call. You can select the volume
of the tone or switch it off, (SILENT MODE).
1) Press FCN + 4 + 5 .
2) Use RCL key to select Off,Min,Low,Mid or Max.
3) Press CLR to exit and save selection
If you select Off, when a call is coming in, the display will flash, the CALL message
will appear and flash.
The Alert Tone on your phone can be selected from four different tone combinations.
1) Press FCN + 4.
2) Press 1.
3) Press RCL to select between the four different tone combinations.
Note: You can listen to each tone combination by pressing 1 again after the
initial pressing of FCN + 4 + 1. Make sure your ringer volume is on.
4) Press CLR to exit and save selection.

USING THE PHONE ON TWO NETWORKS

The phone's two number capability feature lets you subscribe to both cellular
services in your area as well as cellular service in other cities, usually one for
each network. (NAM stands for Number Assignment Module).
Note: You cannot change from one network to the other during a call. (If you
are only registered on one network, you cannot access the other.)
To Change the Network:
1) Press FCN + 5.

SETTING THE RINGING VOLUME

Ring Tone
Low
SELECTING ALERT TONE TYPE
FCN 4 _
Tone
Function
FCN 41
Alert Set
1
FCN 5 _
Call Proc
Function
-16-