Table of Contents
Advertisement
1) Press the PWR key and hold it for at least 2 seconds.
The phone will carry out a short self-test sequence, then briefly display your
wake-up message.
2) When the RSSI Indicator,Date and time and Home indicator appears on the
display, the phone is ready for use.
If NO SVC appears it means that you are outside the cellular service area and the
network cannot serve you.
A cellular phone can only send and receive calls when it is switched on.
3) Press the PWR key and hold it for at least 2 seconds to switch the phone off.
Fully extend the antenna before sending or receiving a call.
Note: Push in the antenna when you are not using the phone.
You can use the phone without extending the antenna in a good coverage area.
1) Key in the number (include the area code if you're making a long distance call).
If you make a mistake, press the CLR key to delete the last keystroke; or to clear
the whole display, press and hold the CLR key.
2) The number will appear on the display.
3) Press SND.
4) The IN USE indicator will appear, and the number will disappear from the
display. The call timer will appear and count.
5) Lift the phone to your ear, and wait until your call is answered.
6) When you have finished the call, press END.
If the message NO SVC appears, you are outside the cellular service area.
If lock indicators (FL)(PL) appears on the display, your phone has been electroni-
cally LOCKED (see Locking the Phone). You can still make emergency calls when
the phone is locked.
1) When there is an incoming call, the phone rings, and the CALL message flashes
on the display.
If the ringing tone has been switched off-the flashing of the display and keypad will
alert you of an incoming call.
2) Press SND (Any Key if Any Key Answer has been turned on) and lift the phone to
your ear.
3) When you have finished your conversation, press END.
If you don't answer the call, the CALLED message will remain on the display
(showing that someone has tried to phone you). Press CLR key to clear the
display.
Received Signal Strength
OPERATION OF THE PHONE
PLACING A CALL
RECEIVING A CALL
Indicator
Feb 2
12:00 a m
Home
-6-
Advertisement
Table of Contents
