Table of Contents
Advertisement
If you make a mistake while keying in a name or a number, you can correct it as
follows:
1) Press CLR to delete the last character or digit.
2) Press and hold CLR to clear the whole display. Note that this clears both the
name and the number entered.
The phone can display up to 16 digits. If you key in more than this, the first digits will
disappear off the side of the display.
If you want to check these hidden digits, press and hold FCN and they will appear
on the display. When you release the FCN key, the original 16 digit display will
reappear.
Remember to clear the whole display (press CLR and hold) after having displayed
a long number.
DELETING INFORMATION FROM MEMORY
1) Press and hold CLR to clear display.
2) Press STO.
3) The display will read.
4) Key in the number of the memory location you want to delete.
5) An alarm tone will sound, and the contents of the memory location will be
displayed and flashing.
6) Press STO. The contents of the memory location will be deleted.
RECALLING MEMORY LOCATION NUMBER
1) Press RCL. The display will show.
2) Key in memory location number (Example 12).
If the memory location is empty, the display will show.
3) Call the number by pressing SND.
EDITING NAMES OR NUMBERS
DISPLAYING "HIDDEN" NUMBERS
flashing
)
12)
1234567
WORK
12)
)
1 2 )
1234567
WORK
-11-
Advertisement
Table of Contents
