Lens Filter Adjustment (In The Case Of Lkra-005) - Sony SRX-R515P Installation Manual

5-8-2. 3D Lens Filter Adjustment (In the Case of LKRA-005)
n
In the LKRA-005 Installation Manual, the procedure for installing LKRA-005 in SRX-R320S is de-
scribed. When installing LKRA-005 in SRX-R515, follow the procedure in this manual.
Adjust the position (depth and vertical directions) of the 3D lens filter so that the image is projected inside
the frame by about 1 cm. Also, adjust the tilt of 3D lens filter so that the light reflected by the 3D lens
filter does not return to the lens.
3D lens filter
Frame
Lens
1 cm
Image
3D lens filter position (depth direction) adjustment
1. Loosen the knobs and position pins.
2. Move the 3D lens filters in the depth direction.
3. Tighten the knobs and position pins.
Knobs
Position pins
Knobs
Position pins
3D lens filters
5-27 (E)
SRX-R515P