Advertisement
Configuration in CRE RPE
Now you're ready to set up your printer in RPE/CRE.
1. Start the RPE/CRE program.
2. Select the Options/Manager and enter your password (where applicable).
3. Select [4] Setup | [L] Friendly Printer Setup and re-enter your password if necessary.
4. Select Receipt in the Select Friendly Printer list on the left.
5. Select the TRST-A1x in the Select local Windows printer list on the right.
6. Select Cut Receipt at this Station.
7. Select Print logo on receipts at this station then select the logo file you would like to print on receipts (if
applicable).
Note: The Pixel aspect ratio for the logo must be 1:3 (i.e. if the image has a 100px height then the width must be
300px). If the image you are using is not in that aspect ratio then it will be distorted.
8. Select Save & Exit.
11 |
P a g e
Advertisement
