Connecting Your Monitor - Dell UltraSharp 24 User Manual

Connecting your monitor

WARNING: Before you begin any of the procedures in this section, follow
the Safety Instructions.
To connect your monitor to the computer:
1. Turn off your computer.
2. Connect the DisplayPort or HDMI cable, and the USB Type-C cable from your
monitor to the computer.
3. Turn on your monitor.
4. Select the correct input source from the OSD Menu on your monitor and then
turn on your computer.
NOTE: U2421E default setting is DisplayPort 1.4. A DisplayPort 1.1 Graphic
card may not display normally. Please refer to
– No image when using DP connection to the
setting.
Connecting the HDMI cable
HDMI
34 | Setting up the monitor
(Optional)
"product specific problems
PC" to change default
HDMI