Electrical Specifications - Dell UltraSharp 24 User Manual

HBR3
HBR2

Electrical specifications

Video input signals
Input voltage/ frequency/current
Inrush current
Power Consumption
As defined in EU 2019/2021 and EU 2019/2013.
1
Max brightness and contrast setting with maximum power loading on all USB ports.
2
Pon: Power consumption of On Mode as defined in Energy Star 8.0 version.
3
TEC: Total energy consumption in kWh as defined in Energy star 8.0 version.
This document is informational only and reflects laboratory performance. Your prod-
uct may perform differently, depending on the software, components and peripherals
you ordered and shall have no obligation to update such information. Accordingly, the
customer should not rely upon this information in making decisions about electrical
tolerances or otherwise. No warranty as to accuracy or completeness is expressed or
implied.
NOTE: This monitor is ENERGY STAR certified.
This product qualifies for ENERGY STAR in the factory default settings which can be
restored by "Factory Reset" function in the OSD menu. Changing the factory default
settings or enabling other features may increase power consumption that could exceed
the ENERGY STAR specified limit.
14 | About your monitor
2
1
• Digital video signal for each differential line
Per differential line at 100 ohm impedance
• DP/HDMI/USB Type-C signal input support
100-240 VAC / 50 or 60 Hz ± 3 Hz / 2.1 A
(maximum)
120 V: 42 A (Max.)
240 V: 80 A (Max.)
Inrush current is measured at an ambient
temperature of 0°C.
0.2 W (Off Mode)
0.2 W (Standby Mode)
17.2 W (On Mode)
186 W (Max)
2
16.16 W (Pon)
3
52.39 kWh (TEC)
1
1
1
3