Optional Blower And Thermodisc Installation - Drolet ESCAPE 1200 Owner's Manual

6.3

Optional Blower And Thermodisc Installation

THE IMAGES SHOWN ARE INDICATIVE ONLY AND MAY DIFFER OF YOUR PRODUCT, BUT THE
A blower and a thermodisc, sold separately, can be installed on the stove. The installation of the
blower is identical for a stove on legs or pedestal. Thermodisc allows the blower to operate only
when the stove is hot enough. See the instructions provided with the thermodisc for more details.
1. Remove the backplate by cutting the knockouts with pliers.
Screw the blower (D) in place using the screws (C) included in the installation manual. Screw
2.
the thermodisc (A) with the screws (B) supplied with the thermodisc on the back of the stove.
Ensure that the blower's power cord is not in contact with any surface of the stove to
prevent electrical shock or fire damage. Do not run the power cord beneath the stove.
Installation and Operation Manual - Escape 1200
ASSEMBLY REMAINS THE SAME.
D
MICROJOINT
A
B
C
Page 25