Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Star Trac CORE HEALTH & FITNESS BOXMASTER BM-K9401
Summary of Contents for Star Trac CORE HEALTH & FITNESS BOXMASTER BM-K9401
- Page 1 CORE HEALTH & FITNESS BOXMASTER OWNER'S MANUAL...
-
Page 2: Table Of Contents
TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS ........................2 IMPORTANT LABEL LOCATIONS ........................4 PRODUCT SPECIFICATIONS ..............4 ASSEMBLY ........................6 OPTIONAL BASE 400-1120 ..............10 MAINTENANCE ........................11 TOOLS ..............11 MAINTENANCE SCHEDULE ..............12 SUPPORT & SERVICE ........................13 Page 1... -
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS WARNING! Before using this product, it is essential to read the ENTIRE Owner’s Manual and ALL installation instructions. The Owner’s Manual describes equipment assembly and instructs members on how to use correctly and safely. Read all warnings posted on the machine. Health related injuries may result from incorrect or excessive use of exercise equipment. - Page 4 When adjusting any seat, knee stabilization pad, range of motion limiter, foothold pad or any other type of adjuster, make certain that the adjusting pin is fully engaged in the hole to avoid injury. If any of the adjustment devices are left projecting, they could interfere with the user’s movement.
-
Page 5: Important Label Locations
IMPORTANT LABEL LOCATIONS This page shows the location of the warning labels and communication stickers placed on the equipment as part of the manufacturing process. It is critical that owners maintain the integrity and placement of these stickers. If you find any stickers missing or damaged the replacement numbers are shown on the support site and following pages. - Page 6 050-5577 STICKER,NOTICE TO OIL 731-0517 731-0512 731-5350 STICKER, WARNING, BOLT STICKER,CAUTION,PINCH BOXMASTER, LOGO, STICKER DOWN 731-5349 731-5348 731-5351 STICKER, CAUTION, WEAR STICKER, CAUTION, DO NOT HIT STICKER, CAUTION, DO NOT PROPER WRIST WRAPS/ BACK OF PAD LEAN ON UNIT/HOLD SPRINGS GLOVES 731-2430 STICKER,WARNING, STANDARD INSTRUCTIONS...
-
Page 7: Assembly
ASSEMBLY Metric Steel Bolts Torque Specifications All equipment MUST be secured Bolt Size Thread Pitch Torque, N-m (lbs-ft) (bolted and tightened) to a solid, level 1.25 10 to13.5 (8 to10) surface, using all of the anchoring 1.25 25.5 to 28.5 (19 to 21) holes provided, to stabilize and eliminate rocking or tipping over. - Page 8 PROCEDURE 1. Locate #1 pad and Upper Spring Arm. Loosely install three (1/4”-20*3/4”, SOCKET HEAD BOLTS), and three (M6, FLAT WASHERS). Tighten all bolts evenly. 2. Locate #2 pad and Upper Spring Arm. Loosely install three (1/4”-20*3/4”, SOCKET HEAD BOLTS), and three (M6, FLAT WASHERS).
- Page 9 8. Locate #10 pad and Lower Left Spring Arm. Loosely install three (1/4”-20*3/4”, SOCKET HEAD BOLTS), and three (M6, FLAT WASHERS). Tighten all bolts evenly. 9. Locate #11 pad and Lower Right Spring Arm. Loosely install three (1/4”-20*3/4”, SOCKET HEAD BOLTS), and three (M6, FLAT WASHERS).
- Page 10 11. Locate the three adjustment set handlebars and tighten them into the upper adjustment frame. Fig. 8 12. Install #1 thru #11 pad assemblies using twenty-four (M10x25mm Socket Head Bolts), twenty-four (M10 Spring Washers), and twenty-four (M10, Flat Washers) Fig. 9 13.
-
Page 11: Optional Base 400-1120
OPTIONAL BASE 400-1120 Fig. 11 16. Assemble the Base: Place the two horizontal fixed plate assemblies flat ( ), then attach the vertical plates and upper fixed plate ( ) with four bolts (731-5340) for the upper fixed plate and twelve bolts (731-0390) for the vertical fixed plates. -
Page 12: Maintenance
MAINTENANCE TOOLS Working on this product will require basic and/or sometimes specialty tools based on the type of service that will be performed at any time. To assist, we recommend having the tools listed available when performing maintenance. Tool Metric Allen Key Set Screwdriver Set, Phillips Metric Open-Ended Wrench Set Screwdriver Set, Flat... -
Page 13: Maintenance Schedule
MAINTENANCE SCHEDULE With durable, high performance components, this equipment is designed for heavy usage with minimal maintenance required. To keep it in top condition, perform regular daily, weekly and monthly preventive maintenance routines outlined below. The safety and integrity of this machine can only be maintained when the equipment is regularly examined for damage and wear and repaired. -
Page 14: Support & Service
SUPPORT & SERVICE For Technical Support, Service, Parts Orders or any Customer Service needs, please contact us direct by phone, email, or through our 24 hour support site: GLOBAL SUPPORT CENTER 4400 NE 77th Avenue, Suite 300 Vancouver, WA 98662 Tel: (360) 326-4090 •... - Page 15 THIS PAGE INTENTIONALLY BLANK Page 14...
- Page 16 PART NUMBER 620-8152, REV C All rights reserved. Star Trac, the Star Trac logo and StairMaster are registered trademarks of Core Health & Fitness, LLC. Schwinn and Nautilus are registered trademarks of Nautilus Inc. used under license to Core Health & Fitness LLC. Throwdown is a registered trademark of Throwdown Industries, LLC.