Advertisement
Available languages
Available languages
Instruction manual
TOOL SPECIFICATIONS
EN
Voltage ~ Frequency [V ~ Hz]
Tank capacity [L]
Fuel consumption [g/kWh]
Employed fuel
Productivity [m
Electrical input [W]
Gas pressure [bar]
Max duration of use [h]
Heat output [kcal/h]
Weight [Kg]
PART LIST
1. Hot air outlet
2. Top cover
3. Handle
4. Air inlet
5. Fuel tank
6. Lower frame
7. On/Off switch
8. Temperature adjust knob
9. Control panel
10. Wheel
11. Fuel tank cap
12. Down cover
13. Temperature display
14. Ambient temperature display
CONTENT OF THE BOX
[DFH-20ATD; DFH-30ATD; DFH-40ATD]
Instruction manual (1 pc), wheels (2 pc), lower frame (1
pc), screws, washers and nut (1 set), wheel axle (1 pc),
latch (2 pc).
[DFH-50ATD; DFH-60ATD]
Instruction manual (1 pc), wheels (2 pc), lower frame
(1 pc), handle (1 pc), screws, washers and nut (1 set),
wheel axle (1 pc), latch (2 pc).
INTENDED USE
This machine is intended for heating outdoor spaces.
Indoor use is permitted only for the temporary heating
of adeguated ventilated buildings or structures under
construction.
Model
/h]
3
DFH-20ATD DFH-30ATD DFH-40ATD DFH-50ATD DFH-60ATD
230 ~ 50
230 ~ 50
25
25
1.85
2.92
Diesel
Diesel
590
750
175
175
0.62
0.95
24
24
17200
25800
19
19.5
SAFETY REGULATION FOR THE
USE
General safety rules
The following listed safety instructions should serve you
for the right use of the tool and for the protection of your
own safety, therefore, please read this very carefully.
When passing this tool to a third person, these
instructions must be handed too.
Retain this user's manual and all other literature
supplied with your tool for any future reference.
Comply with all the safety information and the warnings
on the tool.
Be familiar with the controls and the proper use of the
tool before attempting to use it and above all, make sure
you know how to stop to use it in case of emergency.
Following these simple instructions will also maintain
your tool in good working order.
∙
The tool must be assembled correctly before use.
∙
Only use the tool for its designed purposes.
∙
On the tool, there may be also decals and further
indications about the safety equipment to use that
must be considered. The prevention of accidents is
dependent upon the awareness, common sense and
proper training of everyone involved in the operation,
transport, maintenance and storage of the tool.
∙
Never leave the tool unattended.
∙
Never allow children to use the tool. Children
should be supervised to ensure that they do not play
with the tool.
∙
Keep children and pets away. All onlookers should
be kept at a safe distance away from the tool when it
is in use.
∙
The user is responsible for third parties while
working with the tool.
∙
People who aren't acquainted with the operating
instructions, children, juveniles who have not yet
6
230 ~ 50
230 ~ 50
25
45
3.89
4.95
Diesel
Diesel
850
1240
195
285
0.9
0.9
24
24
34400
43000
25
29
230 ~ 50
45
6.03
Diesel
1400
285
0.9
24
51600
30
Advertisement
