Table of Contents
Advertisement
Chapter 1 Getting Started
Using the keypad
Ellipses
The ellipses ( ... ) character appears at the end of a highlighted menu item to indicate that this item
will take you to another screen (such as "Network Status..." in
Using the keypad
Use the instrument's keypad to enter alpha-numeric values, or to navigate to different screens by
specifying the menu number corresponding to the screen.
Selecting a menu option
There are two ways to select a menu option.
– Use the arrow keys to scroll to the desired option then press the OK key.
– Press the number associated with the menu option.
Specifying On/Off or Yes/No values
On a data entry screen you enter data or specify values. There are two ways to specify on/off or
yes/no values.
– Use the arrow keys to scroll to the desired option then press the OK key to toggle the value on
or off.
– Press the number associated with the menu option to toggle the value on or off.
Entering numeric values
To enter numeric values
1
Use the arrow keys to scroll to and highlight the setting you want to specify.
2
Press OK.
3
Use the up arrow to change the entry type to numeric (123 in upper right area of screen).
4
Use the keypad to type the numeric value.
Typing text
To type text
1
Use the arrow keys to scroll to and highlight the setting you want to specify, and then press
OK.
16
SmartClass TPS User's Guide
22035456, Rev 001
Figure 6 on page
14).
June 2014
Advertisement
Table of Contents
Troubleshooting
