Sharp KS-18EV Service Manual page 11

1. Remove the lid assembly in accordance with "REMOVE OF LID ASSEMBLY".
2. Insert 2 pieces of plastic ruler into the gap between the lid and the lid cover, taking care not to damage
the lid. Then remove the lid away from the lid cover.
3. Separate the lid cover from the lid.
4. Now the lid assembly is free.
1. Remove the body in accordance with "REMOVE OF BODY".
2. Remove the lid assembly in accordance with "REMOVE OF LID ASSEMBLY".
3. Upside down the outer pot, straighter 4 claws of outer pot holding to the upper ring.
4. Remove the outer pot from the upper ring.
5. Now the upper ring is free.
DISASSEMBLING THE LID ASSEMBLY
Lid
REMOVE OF UPPER RING
Outer pot
Fig. 12
Claw of outer pot
Fig. 13
11
Lid cover
Holder plate
Outer pot
Upper ring