Clear Memory - Omega THDP-10 Series Manual

flashing for changing digit.
3. Short press UNIT button to enter LO alarm setting, follow the same step as you set for temperature.
4. Press and hold SET button to save and back to normal measurement mode.
(9) RECORD 99 POINTS (THDP-10 only)
Short press SET button to save current readings (temp. and humidity), REC icon shows next to RH%
readings and record number shows next to temperature readings about 2 seconds then disappear. Meter
may store up to 99 points.
Recall recorded data: long pressing MODE button to review memorized recording, keep pressing
HOLD button to review next data, press BKLT button to view the reading from back number.
Long pressing MODE button again to return measurement mode.

CLEAR MEMORY:

Under 99 points history recording mode, long pressing SET button to clear the memory.
(10) USB ON LINE LOGGING FUNCTION (THDP-10-DL only)
1. Download free software from website.
2. Install USB driver (Step1)
3. Install MIC online logging software(Step2)
4. Plug supplied USB cable onto meter first, turn on the software, PC automatically detect COMM port to
USB.
5. Now meter's readings on line upload to PC software, you may select sample rate from 5 secs ,10
secs ,15 secs.... up to 6 hours, and maximum record point up to 64,000 points.
Data can be saved as .txt or csv. format for further analysis.
ON LINE DATALOGGING PC SOFTWARE SCREEN
Please install USB driver and Datalogger software in your computer, once USB connects with meter and PC,
meter automatically detects correct COM port and meter real time transmits data to PC screen, you will see
some dots on the screen, more dots, more clear to see a curve. After recording for a while, you can see clear
curve as below:
(1) Logger setting:
Locked: no function
Press OK to start recording
Sample rate:
Selectable from 5 seconds to 6 hours
3