Table of Contents
Advertisement
Model DFG-RS5 Digital Force / Torque Indicator
7.6 External Trigger Schematic
SWITCH UNDER TEST
(NO OR NC)
14
1
GND
USER - SUPPLIED
8 DATA MEMORY AND STATISTICS
The DFG-RS5 has a storage capacity of 1,000 data points. Readings may be stored, viewed, and output
to an external device. Individual, or all, data points may be deleted. Statistics are calculated for the data
presently in memory.
To enable memory storage, select DATA Key from the menu, then scroll to Memory Storage and press
ENTER. Then exit the menu. In the home screen, the data record number 0000 appears below the
primary reading. Press DATA at any time to save the displayed reading. The record number will
increment each time DATA is pressed. If DATA is pressed when memory is full the message "MEMORY
FULL" will be flashed at the bottom of the display and a double audio tone will be sounded.
To view, edit, and output stored readings and statistics, select Memory from the menu. The screen
appears as follows:
MEMORY
View Data
View Statistics
Output Data
Output Statistics
Output Data & Stats
Clear All Data
8.1 View Data
All the saved data points may be viewed. The record number is displayed, along with the corresponding
value and presently set unit of measurement. Any readings may be deleted individually. To do so, scroll
to the desired reading and press DELETE. The letter "D" appears to the left of the record number,
indicating that the indicator is in Delete mode, as follows:
0001
8.450 Nm
0002
9.220 Nm
0003
8.445 Nm
0004
8.895 Nm
D
0005
9.095 Nm
0006
8.990 Nm
0007
9.045 Nm
+3.3V
BAT54SLT1G
22k
330 Ohm
IN
TO MICROPROCESSOR
0.1 uF
GND
GAUGE
User's Guide
15
Advertisement
Table of Contents
