Jump Starting - BMW R 1200 GS Adventure 2011 Rider's Manual

8
122
Cylinders not synchronised.
Make sure the throttle-valve
cable is correctly routed.
Check that the throttle-valve
z
cable is seated in guide 4 of
the intake and that the throttle
valve is seated against the
stop.
Seat the fuel-tank cover
in holder 7 and install two
screws 6.
Press the side cover at 4
and 5 to engage it in the
holders.
Install screw 3.
Hold the cover in position and
install short screws 2 and long
screw 1.
Install the front seat (

Jump starting

The wires leading to the
power socket do not have
a load-capacity rating adequate
for jump-starting the engine. Ex-
cessively high current can lead
to a cable fire or damage to the
vehicle electronics.
Do not use the on-board socket
to jump-start the engine of the
motorcycle.
63).