Push footplate 1 of the footrest
forward to disengage.
Push the footplate up until it
locks for riding seated.
Push the footplate down until it
locks for riding upright.
Shift mechanism
Adjusting shift lever
Slacken screw 1.
Turn peg 2 to the desired pos-
ition.
You might experience dif-
ficulties with gearshifts if
the peg is set either too high or
too low. Check the setting of the
peg if you experience gearshift
difficulties.
Tighten screw 1 to the spe-
cified tightening torque.
Peg to gearshift lever
8 Nm
4
53
z