Chapter 4. Inserting T17 Transducers into the Pipe
4.2.2 Mounting the Insertion Mechanism (cont.)
4. Retract the barrel from the packing gland so that the transducer head is recessed in the packing gland (see
Figure 69 below). You will hear the stop ring click when the transducer is fully recessed.
5. Visually inspect the mechanism to make sure the transducer is recessed in the packing gland. Again, make sure
that the top Swagelok fitting is secure and hand-tight.
60
Figure 69: Recessed Transducer Head
Hand Tight
Transducer
recessed in
packing gland
Model T17 Installation Guide