Installing The Second Welding Boss And Nozzle - Diametrical - GE T17 Installation Manual

Chapter 2. Installing the Pipe Nozzles

2.2.6 Installing the Second Welding Boss and Nozzle - Diametrical

Install the second welding boss and nozzle at the marked position (see Figure 22 below) as described in "Installing the
First Welding Boss - Diametrical" on page 12 and "Installing the First Nozzle - Diametrical" on page 14.
Figure 22: Installing the Second Welding Boss and Nozzle
The completed installation should appear as shown in Figure 23 below.
NOZZLE
2 PLACES
WELDING BOSS
2 PLACES
FLOW
45°
Figure 23: Completed Diametrical Installation
16 Model T17 Installation Guide