Digital Instrument Cluster - Skoda Scala 2020 Owner's Manual

Table of Contents

Advertisement

Setting the time
Press and hold the button in the instru-
ment cluster until the menu item Time is
displayed.
Release the button, the display shows the hour set-
ting.
Press the button repeatedly to set the hours.
Wait 4 seconds, the display shows the minute set-
ting.
Press the key repeatedly to set the minutes.
Wait 4 seconds, the display shows the initial set-
ting.
The time is also set in the Infotainment in menu
.
Setting the brightness of the instrument cluster
lighting
The brightness of the instrument lighting is adjusted
automatically according to the given lighting condi-
tions.
When low beam is switched on, the brightness of
the instruments lighting can be adjusted in the fol-
lowing menu in the Infotainment system:
Or:

Digital instrument cluster

Overview
Overview of instrument cluster
Bar with indicator lights
A
Coolant temperature gauge
B
Fuel gauge
C
Display
D
Additional information
E
Central display area
F
NOTICE
Risk of serious damage to the engine and the ex-
haust system!
Never run the fuel tank completely empty!
Driver information system ›
Overview of the main menu items
Driving data
» page 58, Overview
Assist systems - Activate/deactivate assist sys-
tems
Navigation - e.g. Display driving recommendations,
compass, list of destination
Audio - Using radio and media
Telephone - Call list, accept or reject an incoming
call
Vehicle - Vehicle condition
Operation
Press - Return to the menu one level higher
Hold - Show main menu
Press - Change the variant of the display
Hold - Display the menu of preset options with
additional information
Settings
Setting the language
The language is set in the Infotainment in menu
.
Resetting the odometer in the instrument cluster
Select Trip in the menu in instrument cluster display.
Setting the time
The time is set in the Infotainment in menu
Setting the brightness of the instrument cluster
lighting
The brightness is adjusted automatically according
to the given lighting conditions.
Digital instrument cluster
» page 60,
Display.
Rotate - Switch be-
A
tween menu
items/Set values/
Manually change
map scale
Press - Confirm the
menu item
Turn and press - Ac-
tivate automatic
map scale changing
Turn - Select infor-
A
mation
Press - Confirm in-
formation
Hold - Reset counter
57
.

Advertisement

Table of Contents
loading

Table of Contents