Installing and Connecting a Redundant Power System
Figure 2-12
1
Rackmount brackets (2)
2.
With the mounting brackets attached, position the STK-RPS-500PS between the vertical frame
members of the 19-inch rack as shown in
to the frame using four customer-supplied rack screws.
Figure 2-13
1
STK-RPS-500PS
2-18 Installation
Attaching the Rackmount Brackets
Fastening the STK-RPS-500PS to the Rack
2
Rails of 19-inch rack
2
M3 x 6 mm flathead screws (8)
Figure
2-13. Then fasten the STK-RPS-500PS securely
3
Mounting screws