Sewing In Tape - JUKI MO-623N Instruction Manual

Sewing in tape

Sewing In tape
The standard presser foot is equipped with a tape guide. When
sewing shoulders or side seams of stretchy fabrics as a knitted
fabric, a tape works effectively to prevent undesirable stretch of the
fabric.
1. Tum the handwheel toward you until the needles are fully raised.
2. Raise the presser foot, place the tape in the groove (A) on the
presser foot, and lower the presser foot.
3. Loosen the guide adjusting screw (B) to fit the tape guide (C) to
the tape width, then tighten the screw.
4. Tum the handwheel manually to make two or three stitches in
the tape.
5. Place the fabric to be sewn under the presser foot.
6. Sew, guiding the tape lightly.
20