Ordering Part Numbers; Table 5 Hst-X04 Scanner Ordering Part Numbers - Olympus HST-X04 User Manual

a. Comes standard with scanner holes.
b. IHC: Irrigation, scanner holes, and carbides.
c. IHS: Irrigation, scanner holes, and stainless steel frame.
The HST-X04 scanner can also be fitted with SPE wedges. However, probes with a
LEMO connector cannot be used in combination with SPE wedges, due to mechanical
interference.
2.3

Ordering Part Numbers

To order replacement parts for the HST-X04 scanner, please refer to Table 5 on page 19
below.
Quantity
1
1
2
2
2
2
2

Table 5 HST-X04 scanner ordering part numbers

Part number
AAIX202
ENC1-2.5-LM
C563-SM
C543-SM
ABWX385
ABWX386
ABWX387
Probes, Wedges, and Ordering Part Numbers
DMTA020-01EN, Rev. C, March 2014
Item Number
Scanner with a 150 mm
frame, and a
U8775085 supplementary 250 mm
frame for wider probe
center separation.
OmniScan Mini-Wheel
U8775295
encoder LEMO - 2.5M
10 MHz (3 mm element
U8435028 diameter) CentraScan
composite TOFD probes.
5 MHz (6 mm element
U8435020 diameter) CentraScan
composite TOFD probes.
U8710004 ST1-60L-IHC wedge
U8710002 ST1-45L-IHC wedge
U8710006 ST1-70L-IHC wedge
Description
19