Probes, Wedges, And Ordering Part Numbers; Probes; Table 3 Miniature Screw-In Tofd Transducers - Olympus HST-X04 User Manual

2. Probes, Wedges, and Ordering Part Numbers

This chapter presents a list of probes and wedges that can be used with the HST-X04
scanner and describes the parts that are included in the scanner kit.
2.1

Probes

Table 3 on page 17 describes the probes used for inspections made with the HST-X04
scanner.
Frequency
MHz
2.25
5.0

Table 3 Miniature Screw-in TOFD Transducers

Nominal
element size
mm Inches
6 0.25
9.5 0.375
12 0.5
3 0.125
6 0.25
9.5 0.375
12 0.5
Probes, Wedges, and Ordering Part Numbers
DMTA020-01EN, Rev. C, March 2014
Transducer part
numbers
C542-XX a
C566-XX a
C540-XX
a
C567-XX a
C543-XX a
C568-XX
a
C541-XX a
Case Case thread
type pitch
ST1 3/8 - 32
ST2 11/16 - 24
ST2 11/16 - 24
ST1 3/8 - 32
ST1 3/8 - 32
ST2 11/16 - 24
ST2 11/16 - 24
17