Conventions Used In The Following Procedures; Troubleshooting (Later In This Guide); Quick Reference Lists (At The Back Of This Guide) - AT&T Definity 8434 User Manual

Conventions Used in The Following Procedures

[ ]
xxxxx
[ ] and
Feature
[ ]
Feature xxxxx
LWC CnLWC Cnslt AutCB Timer
[feedback tones]

Troubleshooting (Later in This Guide)

Later in this guide you will find a short section on troubleshooting. Use the
procedures listed in that section if you have problems in using your voice terminal.

Quick Reference Lists (At the Back of This Guide)

At the back of this guide is a set of quick reference lists. Use them to record your
feature access codes and trunk codes, Abbreviated Dialing personal list items, and
message and attendant extensions. Once you have completed the lists, remove the
page from the guide (tear along the perforation), and keep the lists near your voice
terminal.
This box represents a call appearance button, which is
used exclusively for placing or receiving calls. The
button has a red light and a green status light and is
labeled with an extension number (shown as xxxxx).
Each of these boxes represents a button that has a
feature assigned to it. The button is labeled with the
feature name, sometimes followed by an extension
number (shown as xxxxx) or a person's name.
This rectangular box, 2 lines by 40 characters,
represents the 8434 display screen. Like the example to
the left, the second line appearing on the display will
most likely list the features you can access with the
softkeys. For directions on using the display and
softkeys, see the section titled Using the Display,
Softkeys, and Display Control Buttons.
The tone that appears in brackets after a step, such as
[dial tone], indicates what you should hear from your
handset (or speakerphone) after successfully performing
that step.
For a list of tones and their meanings, see the section
titled Tones and Their Meanings.
10