Remote Diagnostics - GE Venue 50 Basic Service Manual

Troubleshooting

Remote Diagnostics

NOTE:
7-36
To diagnose the customer console, please follow the steps as
below:
1. Access to https://insite2.health.ge.com/qss/gelogin.jsp.
2. Select Device Type, find the customer PC. Or click Search
, then input some information to find the customer PC.
You may review and check if the customer PC is the right
one by click Device Profile Dialog Icon.
3. Select Connect to device. Click Connect, OK, OK, then
the customer PC screen will show.
4. Go to Homepage->Venue Gateway Software->Connect
Venue 50, then input the Console IP Address and click Ok.
The customer press OK on the console. Then the customer
PC is connected to the console.
5. Press Diagnostics, select the console, then press Run All
Diagnostics or select the desired test and press Run
Diagnostics. The summary will show on the screen.
Figure 7-43. Diagnostics Screen
Venue 50 – Basic Service Manual
5447566-100 English Rev. 7