Connecting probes
Connect a probe
NOTE:
CAUTION
CAUTION
CAUTION
Venue 50 – Basic Service Manual
5447566-100 English Rev. 7
It is not necessary to turn OFF power to connect or disconnect a
probe.
Do not allow the probe head to hang freely. Excessive impact
to the probe will result in irreparable damage.
To prevent probe connector pins damage, or PCB board
damage, do not use excessive force when connecting the
probes.
Keep the probe cables away from the wheels.
Do not bend the probe cables.
Do not cross cables between probes.
Completing the setup
3-25