Switch For Setup Of Hr Unit - LG MULTI V Service Manual

1. Switch for Setup of HR Unit

Dip
SW
Rotary
SW
Push
SW
1. Main function of SW02E
ON S/W
No.1
No.2
No.3
No.4
No.5
No.6
No.7
No.8
SW
0
Method for pipe detection of an HR Unit (Auto/Manual)
Master/Slave (Main PCB) Setting
EEPROM factory initialization (4,5,6)
Use only in factory production (preset to "OFF")
Use only in factory production (preset to "OFF")
Selection of the method for pipe detection
SW02E Selection of Master/Slave Main PCB
(8pin Dip SW)
Selection of the No. of connected branches
SW01E
Selection of the valve to address
(4pin Dip SW)
SW01D Selection of the Valve Group Control
(Left)
SW01C
Manual addressing of zoning indoor units
(Right)
SW02B
(Left)
SW01B
(Right)
Selection
No. of connected branches
- 69 -
Copyright © 2020 LG Electronics Inc.
All rights reserved. Only training and service purposes.
HR Unit PCB
Function
Setting the Zoning Control
Setting to address HR units
Increase in the digit of 10
Increase in the digit of 1
Zoning setting ("ON")