Address Space Operating Mode Pulse-Width Modulation - Siemens SIMATIC S7-1500 Manual

4.2.2

Address space operating mode pulse-width modulation

Address space for configuration as 1 x 8-channel DQ 8x24VDC/2A PWM
If you use the module in the "Pulse width modulation mode" (channels 0 and 4), the module
uses the following address spaces:
● 6 bytes in the process image output
● 1 byte in the process image input
Allocation of the process image
If you have set "Pulse width modulation" mode for channels 0 and 4 in the parameter, bits 0
and 4 have no significance. Enter the on-load factor (duty factor) in the following output
bytes; see the figure below.
Figure 4-3
The figure below shows the address assignment of the module.
Figure 4-4
DQ 8x24VDC/2A HF Digital Output Module (6ES7522-1BF00-0AB0)
Manual, 06/2018, A5E03485650-AF
Allocation in the process image output
Allocation in the process image of the inputs
Parameters/address space
4.2 Address space
29