DQ mode and PWM mode with switching frequency max. 100 Hz
The following graphs apply to resistive loads and inductive loads with max. 2 A total current
of the outputs per channel. Inductive loads in PWM mode require additional wiring to an
external diode; see section Wiring (Page 19). You can find the total current of the outputs for
each channel or for each module in the technical specifications.
①
Horizontal mounting of the system
②
Vertical mounting of the system
Figure 6-2 Details on total current of outputs (per group) in the DQ and PWM operating modes
DQ 8x24VDC/2A HF Digital Output Module (6ES7522-1BF00-0AB0)
Manual, 06/2018, A5E03485650-AF
Technical specifications
39