Needle Threader 2:6; Cutting The Thread 2:6 - Singer EM9305 User Manual

NEEDLE THREADER
The needle must be in the up position to use the built-in needle
threader. We also recommend lowering the presser foot.
1. Use the handle to pull the needle threader all the way
down, catching the thread under the guide (A).
2. Push back to bring the needle threader forward until the
metal flanges cover the needle. A small hook will pass
through the needle eye (B).
3. Place the thread under the flanges in front of the needle, so
the thread catches into the small hook (C).
4. Let the needle threader gently swing back. The hook pulls
the thread through the needle eye and forms a loop behind
the needle.
5. Pull the thread loop out behind the needle.
Note: The needle threader is designed to be used for size 70-
110 needles. You cannot use the needle threader for size 60
needles or smaller.
When threading the needle manually, make sure that the needle
is threaded from front to back. The white presser foot ankle
makes it easy to see the eye of the needle. The bobbin case
cover can be used as a magnifying glass.
CUTTING THE THREAD
Once you have finished embroidering, the threads are cut
automatically by the selective thread cutter.
If you want to cut the threads manually, you must first deselect
Selective Thread Cutter Auto in the Embroidery Settings, see
page 3:6. Then, press the selective thread cutter button (1) on
the machine to cut the threads.
Alternatively, you can use the thread cutter on the left side of
the machine. Pull the threads from the front to the back into the
thread cutter on the left side of the machine.
2:6
A
1. 2.
C
3.
4.
B
5.
1