Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Singer ER10
Summary of Contents for Singer ER10
-
Page 1: Instruction Manual
ER10 Instruction Manual 34074 Singer ER10 Manual.indd 1 6/30/08 10:00:29 AM... -
Page 2: Important Safety Instructions
• To disconnect, turn all controls to the off (“0”) position, then remove plug from outlet. • Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord. • The sound pressure level under normal operating conditions is 70dB(A). SAVE THESE INSTRUCTIONS 34074 Singer ER10 Manual.indd 2 6/30/08 10:00:30 AM... -
Page 3: Table Of Contents
3. Power switch 4. Needle clamp holder 5. Needle plate 6. Flat Bed Extension 7. Accessory storage 8. Cloth presser height adjusting screw 9. Clear fabric cover with needle guard Connection socket 34074 Singer ER10 Manual.indd 3 6/30/08 10:00:31 AM... -
Page 4: Accessories
t fully in the outlet, reverse the plug. If it still does not t, contact a quali ed electrician to install the proper outlet. Do not modify the plug in any way. 34074 Singer ER10 Manual.indd 4 6/30/08 10:00:32 AM... -
Page 5: Cloth Presser
H= high position for heavy or thick fabrics. 4. Tighten the clear fabric cover height adjusting screw. Note: The fabric and felting material must move freely under the clear fabric cover with needle guard without any restrictions. 34074 Singer ER10 Manual.indd 5 6/30/08 10:00:33 AM... -
Page 6: Getting Started
Because of not pre-washing bers before embellishing, color fading can occur when working with bright and contrasting colors. Be sure to make a test sample and wash it for best results. 34074 Singer ER10 Manual.indd 6 6/30/08 10:00:34 AM... -
Page 7: Start Embellishing
You will never break needles placing or removing your project. 34074 Singer ER10 Manual.indd 7 6/30/08 10:00:35 AM... -
Page 8: Flat Bed Extension / Free Arm
This will also give you access to the free arm door to clean out the lint that has accumulated from felting. Accessory Storage Open the accessory storage compartment by pulling the drawer forward. 34074 Singer ER10 Manual.indd 8 6/30/08 10:00:36 AM... -
Page 9: Maintenance
xing screw with 1.5mm hexagon wrench by turning the Allen wrench clockwise. Note: #S1037 needles do not have a front or back, therefore, you can insert the needle in any direction. 34074 Singer ER10 Manual.indd 9 6/30/08 10:00:38 AM... -
Page 10: Replacing The Light Bulb
Clean the lint out after each project. An accumulation of lint in the box or under the stitch plate may cause needle breakage. Slide the lint box back into the machine. 34074 Singer ER10 Manual.indd 10 6/30/08 10:00:40 AM... -
Page 11: Trouble Shooting
Please note that on disposal, this product must be safely recycled in accordance with relevant National legislation relating to electrical/electronic products. If in doubt please contact your retailer for guidance. 34074 Singer ER10 Manual.indd 11 6/30/08 10:00:42 AM... - Page 12 Singer Sewing Company 1224 Heil Quaker Blvd., LaVergne 37086 34074 Singer ER10 Manual.indd 12 6/30/08 10:00:42 AM...