Table of Contents
Advertisement
No.
Event
16 What is indicated
on the Monitor does
not match what is
indicated on the Local
Remote.
17 The panel is not
displayed.
18 The display units have
19 The selected display
20
color of the panel
21 There is a wide
temperature
discrepancy between
what is displayed
and the actual
temperature.
22 Schedule is not
executed.
70
Items to be checked
Check if control is done from
both the system and the Local
Remote.
Check if the connection check is
correctly completed.
Check that there is no error
between the Computer and this
system connection.
Check if the alarm is ON.
Check if the alarm is ON.
Check if the color for operation
Was the Schedule disabled for
Action
status to match.
connection status of the unit.
Check if the LAN cable is wired correctly and if
the HUB and this system power is turned ON.
display unit will automatically switch to unit.
automatically be in All and the display unit will
automatically be in All and the display unit will
Check the Alarm History.
may widely differ from the actual temperature.
Open the control panel of the unit in the monitor
Schedule will be applied by each Group.
Check if each Group is set to execute that
Schedule.
Advertisement
Table of Contents
