Table of Contents
Advertisement
No.
Event
10 RC prohibited item
cannot be selected
when displayed in
11
is displayed and
control from the RC
RC operation is not
prohibited from the
system.
12 The Unit to control
may differ from the
unit that actually is
13
14 Even if operation
is done from the
application display is
15 What is indicated on
the Control Panel
does not match what
is indicated on the
RC.
Items to be checked
Check if the power to this system
for Indoor units.
Check if indoor units without local
Check if the RC prohibited
the control is performed from the
central device.
Check that the update period
Check that there is no error
between the Computer and this
system connection.
and 65 are ON.
Check if the Indoor unit is
controlled from this system.
Are multiple panels selected on
Action
a local controlled to an indoor unit previously
do not operate RC for 10 seconds afterward.
10 seconds.
The shortest period that can be set is 15
seconds.
Check if the LAN cable is wired correctly and
if the HUB and this system power is turned ON.
communication status.
Refer to the Installation manual to correctly set
In case the Indoor unit is controlled from
value that does not match the item will be blank.
69
Advertisement
Table of Contents
