Mazda 3 2019 Owner's Manual page 447

6. Insert the end of the new blade rubber
into the groove of the blade holder
until it contacts the end of the blade
holder.
Owner Maintenance
7. After pulling the blade rubber in the
direction of the arrow and sliding the
blade rubber to a position to check the
blade holder groove, slide the blade
rubber end in the opposite direction.
8. Make sure that the blade rubber is
correctly installed to the blade holder.
9. Slide the blade component and install
it to the wiper arm.
10. Slowly lower the wiper arms onto the
windshield.
Maintenance and Care
6-23